EN74 Standard Adjustable Solid Screw Base Jack
Surface Treatment: Hot Dipped Galvanized, Electro-galvanized, painted, etc.
Material: Seamless pipes, Q235 welded pipes, round bar, etc.
Building and Construction Industries, Shipbuilding, Electrical industry Chemical industry, Offshore Construction and Industrial Maintenance, Indoor & outdoor building maintenance and decoration
EN74 Standard Adjustable Solid Screw Base Jack is an important fitting required in any scaffolding system to provide full support and bear heavy weight at the same time.
|BASE JACK||SIZE||BASE PLATE||U-HEAD JACK||SIZE||U HEAD|
|SOLID BASE JACK||30x600mm||120x120x4/5mm||U-HEAD SOLID JACK||30x600mm||150x120x50x4/5mm|
|HOLLOW BASE JACK||36x4x400mm||150x120x50x4/5mm||U-HEAD U HEAD JACK||36x4x400mm||150x120x50x4/5mm|
Packaging & Shipping
We are using stardard package for EN74 standard adjutable screw base jack which is suitable for exporting and container shipment.
Steel pallet is the mainly packages for customers, also we can pack the base jacks as per your requests.
Besides our existing molded products, we also can produce scaffolding products according to the drawings or samples from our customers.
We control the product quality critically for every step during the manufacturing.
*Raw Material Verification
We require all raw materials come with mills certificates. We also require the primary components tested a third internationally certified laboratories. Testing verification that verifies raw material grade by Chemical analysis and
Physical properties testing is the most critical component of quality control.
*Products or Equipment Tracking Number
All scaffold products or equipments should be stamped with tracking numbers that can track the month/year of manufacturing, from which batch number and worker was made, and also can help to verify the heat number from which product was made.
*In Process Inspection
Each production process has its own Quality control inspector, who is responsible for the quality of that department. Each QC is instructed not to pass on quality issues to the next process. They have the authority not to allow full production to begin until they have verified the first parts meet the standard and they have the authority to halt production if a quality issue appears.
*Factory In House Test
We provide in-house testing to verify product quality. It allows for critical factors of quality to be tested consistently. These tests include Flaring and Flattening testing to verify welding quality, Load Testing to verify material strength,Salt Spray test and Galvanize thickness Gauges to verify surface quality.
*Third Party Inspection
Third party inspection is welcome to offer for the final product before shipment. This inspection team is from the independent third international inspection team, like SGS, Asia Inspection, T.U.V., and so on. They serve as a second tier of protection to prevent quality issue from leaving the factory.
We perform quality audits on our suppliers to verify that they meet need quality standards, or they remain compliant with agreed standards.
*Material Incoming Inspection
All materials received from outside supplier is closely inspected. It can be accepted into production until the Quality Control department has completely inspection it and approved it.
*Root Cause Analysis
Quality issue discovered, if any, it is investigated for its root cause. All quality issues are recorded for an accurate account. Corrective action will be made to address the root cause.
*R & D Support
We have a strong R&D team to support quality control, quality issue overcome, technical and production process improvement, technical support to our clients.
1. Q: Are you real factory ?
A: Yes, we are direct factory and we have 3 factories established on 2002.
2. Q: Do you have customers in our country ?
A: Not sure, Our 100+ customers are from 30+ countries, including Thailand, Singapore, Russian, Korea, USA,UK,Norway,UAE etc, Just contact us to confirm and experience our service and product directly.
3. Q: How about your production and export amount ?
A: 19000T/year, about 70*20ft container per month.
4. Q: What's your payment terms?
A: T/T 30% in advance & T/T 70% upon sending the copy of Bill of Lading, L/C 100%, or negotiate according to the order status.